Attics and roof spaces not accessible by permanent stairs or ladders requires protection for cables only within ____ of the nearest edge of the scuttle hole and attic:

Type MC Cable has a bending radius of ____ times the external diameter of the metallic sheath:

Type AC Cable must be secured within ____ of every box, cabinet or fitting:

Cables installed parallel to framing members shall be installed and supported so that the nearest outside surface of the cable is atleast ______ from the nearest edge of the framing members or furring strip where nails are likely to penetrate:

Conductors associated with air handling spaces in dwelling units must remain at least _____ from the nearest edge of the wood members:

____ Cables shall have an internal bonding strip in intermediate contact with the armor for its entire length:

Exposed Runs of Type MC Cables must be supported and secured at intervals of ____ or less:

Interlocking armor Type MC Cable requires an equipment grounding conductor:

The nearest outside surface of installed and supported exposed non metallic sheathed cable in unfinished basements and crawl spaces must be atleast ____ from the nearest edge of the framing members where nails or screws are likely to penetrate:

The White and Gray conductors shall not be used as a return conductor from the switch to the outlet:

Direct buried conductors and cables emerging from the ground must be protected by enclosures and raceways:

Minimum cover required for 600V direct burial cables or conductors in a trench below 50mm thick concrete or equivalent is _____: