The branch circuit supplying the fire alarm equipment(s) shall be supplied through ground-fault
circuit interrupters or arc-fault circuit-interrupters.

The branch-circuit overcurrent protection supplying the fire alarm system shall not exceed ___ amperes

Fire alarm system cabbles exposed within 7 ft (2.1 m) of the floor, the cable shall be securely fastened at intervals not over ___:

The branch circuit supplying the fire alarm equipment(s) shall supply no other loads.

The fire alarm circuit disconnect shall be permitted to be secured in the __ position.

Overcurrent protection for NPLFA circuit shall not exceed _____ amperes for 16 AWG conductors.

Cables shall be installed in metal raceways or rigid nonmetallic conduit where passing through a floor or wall to a height of ___ above the floor:

Cable and conductors of two or more power-limited fire alarm circuits shall be permitted
within the same cable, enclosure, cable tray, or raceway

Cables shall not be supported by taping, strapping, or attaching by any means to any electrical
conduits, or other raceways

Low-power network powered broadband communications circuits shall not be permitted
in the same enclosure, cable tray, or raceway with PLFA cables.