A minimum of _____ vertical clearance is required over commercial areas (not subjected to truck traffic) provided conductor voltage doesnot exceed 300V to ground

Other associated equipment located above or below electrical equipment, cannot extend more than ___ beyond the front of the electrical equipment

Equipment rated above 1200 amperes or more and over 6 ft wide containing overcurrent devices requires an entrance atleast ____ wide at each end of the working space:

Where rear access is required to work on nonelectrical parts at the back of enclosed equipment, a minimum working space of ____ horizontally is required:

Atleast 2 entrances of sufficient area must be provided. giving access to the electrical equipment working space:

Not more than ___ of a power panel board overcurrent devices protect lighting and applicable branch circuits:

A maximum of ____ overcurrent devices (excluding those provided for in the mains) can be installed in any one cabinet/cutout box of a lighting and appliance branch circuit panelboards

Individual protection for a lighting and appliance panelboard shall be required if the feeder has overcurrent protection not exceeding the panelboard ratings

The conductor ampacity from the Generator terminals to the first distribution devices containing overcurrent device must not be less than ___ of the generator nameplate current rating:

Unbroken busway lengths shall not be extended through the dry walls: