Electrical Service Drop conductors can be attached to the service Mast:

The radius of curvature of inner edge of any bend must be at least ____ times the diameter of the service entrance cable:

Service Entrance cables must be supported within ___ of every raceway or enclosure connection:

Conductor voltage exceeding 300V to ground has a minimum vertical clearance of ____ :

The 3 feet clearance required for open conductors or multi conductor cable from windows is not required for windows which are meant to open:

Service drop conductors above a roof with slope atleast 4 inches in 12 inches has a minimum clearance of ____:

A minimum of ____ of working space headroom is required around service equipment, switchboards, panel-boards or motor control centers:

The frontal work space width of electric equipment must be greater of the width of the equipment or ____:

Equipment can be located behind a door provided a ___ working space is achieved by closing the door:

A minimum of ___ over current devices can be installed in any one cabinet or cutout box of a lighting and appliance branch-circuit panel-board:

For vertically operated circuit breakers, the UP position of the handle must be OFF position:

A one family dwelling service disconnecting means have a minimum rating of ___: