Type MC Cables containing no more than four conductors, size of 10 AWG or smaller must be secured within ______ of every box, cabinet and fittings:

Non metallic sheathed cable has a minimum bending radius of ____ times the cable diameter:

Type MV Cable shall not be used where exposed to direct sunlight, unless identified for the use:

Type MI Cable diameters greater than 19mm but less than 25 mm in external diameter must have a bend radius not less than ______ the external diameter:

When using single conductor Type MI cables, all the phase conductors and neutral conductors must be grouped together to:

Conductors passing through the metal studs or framing members must require protection in the form of:

The white or gray conductor can be used to feed a switch or can be a traveler in three way switch installation:

The cable installed parallel to framing members must be protected from penetration of nails by a minimum ____ thick steel plate:

The maximum distance between supports depends on the type of the cable:

The minimum cover required for 600 V nominal  rated directly buried cable under streets, highways, roads and alleys shall be _____: