Overhead conductor spans must maintain vertical clearance of _____ above residential property and driveways and those commercial areas not subject to truck traffic for 120V, 120/208V, and 480V circuits:

Overhead conductors must maintain a clearance of ____ from the chimneys, radio and television antennas and other non building structures:

AC systems less than ____ are not required to be grounded:

Equipment can be located behind the door provided a _____ working space is achieved by closing the door:

Nonmetallic-sheathed cable (secured to the box) must be secured within _____ of every box, cabinet or fitting:

The maximum approved electrical trade size for RMC is _______:

No part of chain, cable or cord suspended luminaires can be located within _____ vertically from the top of the bathtub rim or shower stall threshold:

A short circuit rating is not required on controllers rated less than ____ at 300V or less, if they are listed for use on general purpose branch circuits:

A general use ac snap switch where the motor FLC rating is not more than _____ of the ampere rating of the switch:

Snap switches rated ____ or less connected to aluminum wire must be marked CO/ALR:

Overhead service conductors must maintain a vertical clearance not less than _____ above platforms, projections, or surfaces from which they ,might be reached:

For a feeder rated 100A through 400A, feeder conductors supplying a one family dwelling, or an individual dwelling unit in a two family or multifamily dwelling, can have an ampacity of _____ of the feeder rating, but only if the feeder supplies the entire load of the dwelling:

Type AC Cable can be unsupported where the cable is not more than ______ long at terminals where flexibility is necessary:

Type NM cable may be used in wet and damp locations:

PVC conduit smaller than trade size ______ must not be used: