A general use ac snap switch where the motor full load current rating is not more than ______ of the ampere rating of the switch:

Dry type transformers  _____ or less installed in open spaces are not required to be readily accessible:

A personnel doors intended for entrance to and egress from designated as battery rooms must be open in the opposite direction of the egress and be equipped with listed panic hardware:

If the primary protection rating of the transformer is less than 9A, maximum overcurrent protection provided is _______ :

The transformer heating from a harmonic currents is proportional to the ______ of the harmonic frequency:

Surface metal raceways are not permitted to be installed if the voltage is 300V or more between the conductors, unless the metal has a thickness of not less than ________:

LFNC must be securely fastened within an interval not exceeding _______:

______ is the conductors between the service equipment, a separately derived system, or other power supply and the final branch circuit overcurrent device:

_____ is the ratio of the maximum demand to the total connected load:

A Continuous load is one in which maximum current is expected for a duration of _____ or more continuously:

The branch circuit VA load for heavy duty lampholders must be calculated at a minimum of ______ :

Branch circuits for indicative luminaires or LED drivers must be sized to the:

A demand factor of _____ can be applied to the total connected load of four or more appliances on the same feeder/service in a dwelling unit: